Apr 9, 2018

Android Emulator command line parameters

Emulator command line parameters

CategoryOptionDescriptionComments
AVD-avd <avd_name> or
@<avd_name>
Required. Specifies the AVD to load for this emulator instance.You must create an AVD configuration before launching the emulator. For information, see Managing AVDs with AVD Manager.
Disk Images-cache <filepath>Use <filepath> as the working cache partition image.An absolute or relative path to the current working directory. If no cache file is specified, the emulator's default behavior is to use a temporary file instead.For more information on disk images, use-help-disk-images.
-data <filepath>Use <filepath> as the working user-data disk image.Optionally, you can specify a path relative to the current working directory. If -data is not used, the emulator looks for a file named userdata-qemu.img in the storage area of the AVD being used (see -avd).
-initdata <filepath>When resetting the user-data image (through -wipe-data), copy the contents of this file to the new user-data disk image. By default, the emulator copies the<system>/userdata.img.Optionally, you can specify a path relative to the current working directory. See also-wipe-data.For more information on disk images, use-help-disk-images.
-nocacheStart the emulator without a cache partition.See also -cache <file>.
-ramdisk <filepath>Use <filepath> as the ramdisk image.Default value is<system>/ramdisk.img.Optionally, you can specify a path relative to the current working directory. For more information on disk images, use -help-disk-images.
-sdcard <filepath>Use <file> as the SD card image.Default value is<system>/sdcard.img.Optionally, you can specify a path relative to the current working directory. For more information on disk images, use -help-disk-images.
-wipe-dataReset the current user-data disk image (that is, the file specified by -datadir and-data, or the default file). The emulator deletes all data from the user data image file, then copies the contents of the file at -inidata data to the image file before starting.See also -initdata.For more information on disk images, use-help-disk-images.
Debug-debug <tags>Enable/disable debug messages for the specified debug tags.<tags> is a space/comma/column-separated list of debug component names. Use -help-debug-tags to print a list of debug component names that you can use.
-debug-<tag>Enable/disable debug messages for the specified debug tag.Use -help-debug-tags to print a list of debug component names that you can use in <tag>.
-debug-no-<tag>Disable debug messages for the specified debug tag.
-logcat <logtags>Enable logcat output with given tags.If the environment variable ANDROID_LOG_TAGS is defined and not empty, its value will be used to enable logcat output by default.
-shellCreate a root shell console on the current terminal.You can use this command even if the adb daemon in the emulated system is broken. Pressing Ctrl-c from the shell stops the emulator instead of the shell.
-shell-serial <device>Enable the root shell (as in -shell and specify the QEMU character device to use for communication with the shell.<device> must be a QEMU device type. See the documentation for '-serial dev' athttp://wiki.qemu.org/download/qemu-doc.html for a list of device types.
Here are some examples:
  • -shell-serial stdio is identical to -shell
  • -shell-serial tcp::4444,server,nowait lets you communicate with the shell over TCP port 4444
  • -shell-serial fdpair:3:6 lets a parent process communicate with the shell using fds 3 (in) and 6 (out)
  • -shell-serial fdpair:0:1 uses the normal stdin and stdout fds, except that QEMU won't tty-cook the data.
-show-kernel <name>Display kernel messages.
-trace <name>Enable code profiling (press F9 to start), written to a specified file.
-verboseEnable verbose output.Equivalent to -debug-init.
You can define the default verbose output options used by emulator instances in the Android environment variable ANDROID_VERBOSE. Define the options you want to use in a comma-delimited list, specifying only the stem of each option: -debug-<tags>.
Here's an example showing ANDROID_VERBOSE defined with the -debug-init and -debug-modemoptions:
ANDROID_VERBOSE=init,modem
For more information about debug tags, use <-help-debug-tags>.
Media-audio <backend>Use the specified audio backend.
-audio-in <backend>Use the specified audio-input backend.
-audio-out <backend>Use the specified audio-output backend.
-noaudioDisable audio support in the current emulator instance.
-radio <device>Redirect radio modem interface to a host character device.
-useaudioEnable audio support in the current emulator instance.Enabled by default.
Network-dns-server <servers>Use the specified DNS server(s).The value of <servers> must be a comma-separated list of up to 4 DNS server names or IP addresses.
-http-proxy <proxy>Make all TCP connections through a specified HTTP/HTTPS proxyThe value of <proxy> can be one of the following:
http://<server>:<port>
http://<username>:<password>@<server>:<port>The http:// prefix can be omitted. If the -http-proxy <proxy> command is not supplied, the emulator looks up thehttp_proxy environment variable and automatically uses any value matching the <proxy> format described above.
-netdelay <delay>Set network latency emulation to <delay>.Default value is none. See the table inNetwork Delay Emulation for supported<delay> values.
-netfastShortcut for -netspeed full -netdelay none
-netspeed <speed>Set network speed emulation to <speed>.Default value is full. See the table inNetwork Speed Emulation for supported<speed> values.
-port <port>Set the console port number for this emulator instance to<port>.The console port number must be an even integer between 5554 and 5584, inclusive. <port>+1 must also be free and will be reserved for ADB.
-report-console <socket>Report the assigned console port for this emulator instance to a remote third party before starting the emulation.<socket> must use one of these formats:
tcp:<port>[,server][,max=<seconds>]
unix:<port>[,server][,max=<seconds>]
Use -help-report-console
to view more information about this topic.
System-cpu-delay <delay>Slow down emulated CPU speed by <delay>Supported values for <delay> are integers between 0 and 1000.Note that the <delay> does not correlate to clock speed or other absolute metrics — it simply represents an abstract, relative delay factor applied non-deterministically in the emulator. Effective performance does not always scale in direct relationship with <delay> values.
-gps <device>Redirect NMEA GPS to character device.Use this command to emulate an NMEA-compatible GPS unit connected to an external character device or socket. The format of <device> must be QEMU-specific serial device specification. See the documentation for 'serial -dev' athttp://wiki.qemu.org/download/qemu-doc.html.
-nojniDisable JNI checks in the Dalvik runtime.
-qemuPass arguments to the qemu emulator software.
Important: When using this option, make sure it is the last optionspecified, since all options after it are interpretted as qemu-specific options.
-qemu -enable-kvmEnable KVM acceleration of the emulator virtual machine.This option is only effective when your system is set up to use KVM-based VM acceleration. You can optionally specify a memory size (-m <size>) for the VM, which should match your emulator's memory size:
-qemu -m 512 -enable-kvm
-qemu -m 1024 -enable-kvm
-qemu -hDisplay qemu help.
-gpu onTurn on graphics acceleration for the emulator.This option is only available for emulators using a system image with API Level 15, revision 3 and higher. For more information, see Using the Android Emulator.
-radio <device>Redirect radio mode to the specified character device.The format of <device> must be QEMU-specific serial device specification. See the documentation for 'serial -dev' athttp://wiki.qemu.org/download/qemu-doc.html.
-timezone <timezone>Set the timezone for the emulated device to <timezone>, instead of the host's timezone.<timezone> must be specified in zoneinfo format. For example:"America/Los_Angeles"
"Europe/Paris"
-versionDisplay the emulator's version number.
UI-dpi-device <dpi>Scale the resolution of the emulator to match the screen size of a physical device.The default value is 165. See also -scale.
-no-boot-animDisable the boot animation during emulator startup.Disabling the boot animation can speed the startup time for the emulator.
-no-windowDisable the emulator's graphical window display.
-scale <scale>Scale the emulator window.<scale> is a number between 0.1 and 3 that represents the desired scaling factor. You can also specify scale as a DPI value if you add the suffix "dpi" to the scale value. A value of "auto" tells the emulator to select the best window size.
-raw-keysDisable Unicode keyboard reverse-mapping.
-noskinDon't use any emulator skin.
-keyset <file>Use the specified keyset file instead of the default.The keyset file defines the list of key bindings between the emulator and the host keyboard. For more information, use-help-keyset to print information about this topic.
-onion <image>Use overlay image over screen.No support for JPEG. Only PNG is supported.
-onion-alpha <percent>Specify onion skin translucency value (as percent).Default is 50.
-onion-rotation <position>Specify onion skin rotation.<position> must be one of the values 0, 1, 2, 3.
-skin <skinID>This emulator option is deprecated.Please set skin options using AVDs, rather than by using this emulator option. Using this option may yield unexpected and in some cases misleading results, since the density with which to render the skin may not be defined. AVDs let you associate each skin with a default density and override the default as needed. For more information, see Managing Virtual Devices with AVD Manager.
-skindir <dir>This emulator option is deprecated.See comments for -skin, above.
Help-helpPrint a list of all emulator options.
-help-allPrint help for all startup options.
-help-<option>Print help for a specific startup option.
-help-debug-tagsPrint a list of all tags for -debug <tags>.
-help-disk-imagesPrint help for using emulator disk images.
-help-environmentPrint help for emulator environment variables.
-help-keysPrint the current mapping of keys.
-help-keyset-filePrint help for defining a custom key mappings file.
-help-virtual-devicePrint help for Android Virtual Device usage.